Contact us for the latest range of Esab/Cigweld Tig welders and consumables, or drop into our showroom at 500 Boundary St Toowoomba.


Setting Range
TIG AC/DC: 4-220A
MMA: 16-160A

Mains Supply
230V, 50/60Hz

Fuse (slow)
16A

Mains Cable
3 x 1.5mm2

Open Circuit Voltage
54-64V

Enclosure Class
IP 23

Dimensions
407L x 187W x 345H mm

Weight
15kg

ESAB Caddy Tig 2200i

Compact and portable inverter for AC/DC TIG welding, with HF or LiftArc start, and MMA.

Designed for high-quality TIG-welding, in both DC and AC mode, this TIG welding machine will give an excellent arc strike and consistent, stable arc. All types of material and thickness up to 5 mm can be welded with the highest quality.

One of the most important tasks of an AC TIG machine is to provide a stable arc. The Tig 2200i has the QWave™ function which optimises the AC waveform to give a smooth arc and at the same time the lowest possible noise without compromising the welding result. This machine also has True AC rating where the set current is always equal to the true current.

  • Designed for quality TIG-welding in all types of material.
  • Easy to use – all welding parameters presented in an easy to understand layout.
  • QWave™- enables AC welding with high arc stability and low noise.
  • AC frequency and balance control – optimises weld pool.
  • Electrode preheating – excellent start an extended electrode lifetime
  • ESAB 2-program function – possibility to preprogram and change program during actual welding.
  • DC Pulsed TIG welding – easy control of heat input and the weld pool.
  • DC Micro Pulse – minimize heat affected zone especially on thin sheets
  • True MMA welding characteristics in AC and DC mode – Hot start, Arc force, and polarity switch (DC)