Contact us for the latest range of Miller Engine Driven welders and consumables, or drop into our showroom at 500 Boundary St Toowoomba.


Miller Bobcat 260 Petrol

PROCESSES

  • Stick
  • Non-Critical AC TIG
  • MIG
  • Flux-cored
  • DC TIG
  • Cutting and gouging
  • Air plasma cutting with optional Cutmatic 45 models
  • Air carbon arc

Remote Start/Stop
Take control and eliminate noise. Easily turn your Bobcat machine on and off remotely so it only runs when you need it. Get more out of each tank, extend time between maintenance and work without the hassle of walking back to your machine. The remote start/stop on Bobcat 260 welder/generators is installed and backed by Miller — so it’s just as easy to use and dependable as your Bobcat machine.

Designed for Reliability
The most rugged, durable and long-lasting in the industry. We manufacture them to exceed requirements for extreme working conditions and they are hard-working from the core with:

Copper windings and iron generator components for a quality-built machine.
Lugged — not soldered — heavy internal leads for better field durability.
Superior cooling technology for maximum performance and engine life.
Protective cover for the weld studs and 240 V socket outlets.
Lift hook integrated into the center frame, which bolts to the machine’s base for greater durability.
Savings on Fuel and Maintenance
When your machine is out of reach, it’s a hassle to walk back to turn it off — so you let it run all day. Running a welder/generator when you’re not welding or generating AC power uses more fuel and adds unnecessary hours to the engine, which leads to an increased need for oil changes, air filters, fuel filters and even generator brushes. You’re wasting money on fuel and doing more routine maintenance than you need to. A Bobcat welder/generator with remote start/stop is quick and easy to turn off when it’s not being used. You spend less money on fuel, and less time and money on maintenance because there are fewer engine hours.

Hands-free Starting
Petrol Bobcat welder/generators now have eChoke™ technology, which automatically sets the proper air/fuel mixture and eliminates the need to manually engage the choke, so cold-starting is now hands-free.

Small, Light Design
Bobcat welder/generators take up less space on trucks and trailers — leaving more room on your truck for other equipment and tools. Plus, they’re easier to move around jobsites — even with weld cables attached.

Jobsite Safety
The noise of a welder/generator running all day is irritating — and can even keep you from hearing sounds that warn you of potential hazards. When you turn your Bobcat off with remote start/stop, you’ll help create a safer environment by reducing the number of machines running on a jobsite and increasing your awareness of warning sounds.

Easy Maintenance
With its intuitive design, the daily maintenance of our Bobcat welder/generators is fast and easy. Front panel maintenance displays help you know when your equipment needs to be serviced. Servicing is simple because of:

Oil checks that can be performed easily through the top of the machine by the access door.
Toolless panels that allow for quick access.
Single-side fuel fill and oil drain/filter.
Long Runtimes
Large 45 litre fuel capacity means many hours of run time before refueling.

Versatile AC & DC Weld Output
Provides quality welds on all types of metals. DC is smooth and easy to run while AC stick is used when arc blow occurs.

Accu-Rated™ – Not Inflated Generator Power
Our Accu-Rated™ 11,000 watts of usable peak power is delivered for a minimum of 30 seconds. Accu-Rated means peak power is usable for maximum generator loads such as plasma cutting. Accu-Rated peak power beats the competition’s very short-duration peak or surge power. Use your peak power, it’s more than a number.

Auxilary Output
2 X 15 Amp Sockets.
RCD.
1 X 32 A 240 V 1PH 60Hz.
3 Year Warranty
For details, refer to Miller’s True Blue warranty statement.


Miller Trailblazer 325

Exclusive Auto-Speed Technology

Delivers Superior Run Times

Improved Performance 

Less Noise

Unbeatable Arc Performance

Wide amperage output with better welding deposition rates means you can get jobs done faster, saving time and money. The Trailblazer also has precise arc control, which allows you to finetune the arc to match your personal preferences and quickly dial in the perfect parameters to optimize weld quality and maximize productivity across a variety of applications and welding processes. 

Fewer Refueling Trips

No other engine driven welder/ generator in the 300 amp class lets your crews spend more time working and less time refuelling — because only Trailblazer welder/generators provide Auto-Speed™ technology to deliver maximum runtime.

Cleaner & Stronger Generator power

Trailblazer welder/generators offer 10,500 watts of clean, truly usable generator power that is Accu-Rated™, not inflated: tested to deliver uninterrupted peak output of 12,000 watts for a minimum of 30 seconds for big loads, so you can get more jobs done.

An independent welder and generator power system ensures no interaction between job-site tools and the welding arc, while advanced generator technology virtually eliminates power spikes and other electrical imperfections – so welds are cleaner and job-site tools can run without interruption, maximizing quality, productivity and profit.

Auto-Speed Technology™

Matches engine speed to load – a Miller exclusive. Get the welding power you need plus reduced fuel consumption and lower noise levels for a more-profitable, safer job-site.

Unlike competitive machines that operate at 3,600 rpm (max) under any load, Miller exclusive Auto-Speed technology responds to

refuelling time and operating costs are reduced, which means more productivity and profitability. Plus everyone on the job-site gets a better working environment because noise levels and exhaust emissions are lowered.

Auxiliary Power*

  • 2 x 15 Amp Sockets
  • 1 x 32A
  • RCD Protected

3 Year Warranty 

Welder/generator is warranted by Miller for 3 years, parts and labour.

For details refer to Miller’s True Blue warranty statement. Engine is warranted separately by engine manufacturer.

*Generator auxiliary power is 60Hz, and intended for operating equipment associated with welding, such as angle grinders, drills and floodlights. Some Australian 50Hz equipment incorporating induction motors, such as pumps, fans, air compressors, refrigeration or air-conditioners, may not operate correctly and could be damaged. Refer to appliance supplier or manufacturer to confirm suitability


Miller Big Blue 400X Pro

Superior Arc Performance

  • Four pre-set DIG settings (Stick).
  • Hot Start™ (Stick).
  • Lift-Arc™ TIG with Auto-Stop™ and Crater-out.
  • MIG/FCAW arc performance.

Auto Remote Sense™

Detects if a remote control is plugged into the 14-pin receptacle and eliminates confusion of a remote/panel switch.

Caterpillar Heavy Duty Low-Speed Industrial Engine

Designed to operate for 10,000 hours before the first basic overhaul.

Quiet Operation

Improves work site communication.

The Vault: Ultimate Control Board Reliability

Ultimate control board reliability. Solid-state control technology, housed in a sealed vault. The vault’s sealed connections are made through watertight plugs that make these components impenetrable to dust and moisture.

Simple-to-Set Controls

No elaborate procedure, just select process and weld!

Meter Maintenance Displays

  • Fuel gauge.
  • Hour meter function.
  • Oil change interval.
  • High coolant temperature and low oil pressure shut downs.
  • Low fuel shutdown – engine shuts down before system runs out of fuel, making restarts easy.

Auxiliary Power*

  • 2 X 15 Amp Sockets.
  • 1 X 32 Amp Sockets.
  • RCD.

*Generator auxiliary power is 60Hz, and intended for operating equipment associated with welding, such as angle grinders, drills  and floodlights. Some Australian 50Hz equipment incorporating induction motors, such as pumps, fans, air compressors, refrigeration or air-conditioners, may not operate correctly and could be damaged. Refer to appliance supplier or manufacturer to confirm suitability.

VRD to CAT C AS1674.2

3 Year Warranty

Welder/generator is warranted by Miller for 3 years, parts and labour. For details, refer to the Miller warranty statement. Engine is warranted separately by engine manufacturer.

Miller Big Blue 500X Pro

Auto Remote Sense

Detects if a remote control is plugged into the 14-pin receptacle and eliminates confusion of a remote/panel switch.

Infinite Arc Control

Allows the arc characteristics to be changed for specific applications in Stick, MIG and FCAW.

Lift-Arc TIG with Auto Crater & Auto Stop

Lift-Arc TIG provides soft TIG arc starting without the use of high frequency, while Auto Crater and Auto Stop eliminates tungsten and workpiece contamination.

Thermal Overload Protection

Prevents machine damage if the duty cycle is exceeded or airflow is blocked.

Standard Features

  • Vandal Proof Doors
  • Digital Preset Weld Meters
  • Automatic Idle
  • Cold Weather Starting Aids

The Vault

Ultimate control board reliability. Solid-state control technology, housed in a sealed vault. The vault’s sealed connections are made through watertight plugs that make these components impenetrable to dust and moisture.

Remote Oil Drain

Prevents spills and makes servicing easy.

Meter Maintenance Display

Includes oil pressure, coolant temperature, battery voltmeter, fuel gauge and engine hour meter.

Low OCV Stick (VRD)

Reduces the open-circuit voltage to 15 volts when the welding power source is not in use. This feature is now built into the Big Blue 500X Pro for increased operator safety without compromising arc starts.

Heavy Duty Low Speed Industrial Diesel Engines

The cleanest, greenest diesel power available. Deutz T4F models utilise diesel oxidation catalyst (DOC) technology to keep the air clean with NO exhaust after treatment maintenace.

Polarity Change Switch

Switch allows easy change of weld polarity, without the need to undo weld cables.

Auxiliary Power*

  • 1 x 380 V 32 Amp 3 Phase Sockets
  • 2 x 240 V 15 Amp 1 Phase Sockets
  • RCD 

3 Year Warranty

Welder/generator is warranted by Miller for 3 years, parts and labour. For details, refer to the Miller warranty statement. Engine is warranted separately by engine manufacturer.

*Generator auxiliary power is 60Hz, and intended for operating equipment associated with welding, such as angle grinders, drills  and floodlights. Some Australian 50Hz equipment incorporating induction motors, such as pumps, fans, air compressors, refrigeration or air-conditioners, may not operate correctly and could be damaged. Refer to appliance supplier or manufacturer to confirm suitability.


Miller Big Blue 800X Air Pak

ArcReach welding technology minimises the non-value added time spent walking to and from the power source – and maximises arc-on time, weld quality and jobsite safety.

More Power

800 Amps of weld power and 27,000 watts of peak generator power.

Multi-Arc Welding

One dependable engine — two independent arcs with up to 400 Amps each. Or plug in an additional inverter for a true multi operator work platform! Example: Two additional XMT multi-process machines equals 4 operators, up to 200 Amps each. Premium quality arcs allow operators to work independently with no arc interaction. Multi-operator welding has never been easier or more versatile.

Ingersoll Rand

Ultra-reliable industrial rotary screw compressor. 30,000-hour life expectancy. Independent on/off control for applications not requiring compressed air — allows greater fuel savings and longer compressor service intervals.

Auto Remote Sense™

Standard 14-pin receptacle. For simple connection of remote controls and wire feeders.

HD Powder Coat

With zinc-rich primer, protects sheet metal from rust and corrosion.

Increased Efficiency

More arcs and better fuel economy equal increased profits for your business. Estimated savings are 34 percent with a dual-operator unit versus two single operator units.

Digital Meters

SunVision technology enables welding parameters to be viewed with greater clarity than analogue meters at virtually any angle. Meters can be seen clearly even in direct sunlight.

Industrial USB Port

Quickly upload the latest software and download machine log files to retrieve in-depth information such as diagnostics and machine statistics.

Auxiliary Power*

  • 1 x 415-380V
  • 32 Amp sockets.
  • 2 X 240 V 15 Amp sockets
  • RCD

*Generator auxiliary power is 60Hz, and intended for operating equipment associated with welding, such as angle grinders, drills and floodlights. Some Australian 50Hz equipment incorporating induction motors, such as pumps, fans, air compressors, refrigeration or air-conditioners, may not operate correctly and could be damaged. Refer to appliance supplier or manufacturer to confirm suitability.

Arc Control

Beneficial when welding with stick and solid wires for easier fine-tuning of tough-to-weld materials and out-of-position applications.

Simple Paralleling Switch

Makes switching from a single operator to dual operators a breeze. Weld up to 400 Amps per side when set up in dual-operator mode, or up to 800 Amps in single-operator mode.

20,000 Watts of Pure Generator Power

Plug in an extra Miller inverter-based power source for a second welding arc.

Heavy-duty Low Speed T4I Industrial Diesel Engines

Electronic Engine Display

Simultaneously displays fuel level, engine hours, coolant temperature, oil pressure, battery volts, engine rpm, and air pressure. It also tracks oil change intervals, compressor hours, and displays engine diagnostics for quick and easy servicing.

Standard Features

  • ArcReach
  • Digital preset weld meters
  • Automatic idle
  • Vandalism lockout